16Ft 6AN Black Oil Line 3/8 Nylon Braided+AN6 Hose End Fitting Adapter Kit

ESPEEDER 16Ft Oil Hose Line Nylon Braided+AN 6 Hose End Fitting Adapter KitHow to get a good connection of the hose and fittings? 1、Disassemble the fitting first and slide the sleeve over the end of the braided hose 2、With the hose end fully seated in the sleeve,Push the other side of the fitting into the hose and sleeve while turning to make sure the threads insert the hose 3、Using the Aluminum AN adjustable wrench to protect the finish,continue screwing the fitting together until it is completely assembled An adjustable AN wrench is highly recommendedA quick and easy tip for cut hose without destroying the steel braid: Wrap duct tape tightly at the cut off area and cut through the center of the wrapped up tape rotating the hose during the cut!! before you unwrap the 1/2 tape use a belt sander or Belt grinder (hard wheel bench grinder may work too) to deburr the edge of the hose grinding it away from the hose itselfItem Specifications: Application:Universal (for most transmission oil/fuel/water) Fitting Material:Aluminum AlloyFitting size:AN6 Working pressure: 500PSI Burst Pressure: 2000 PSIHose Inner Diameter: 8.73mm(0.34inch) Hose Outer Diameter: 14.22mm(0.56inch)Working temperature:-40F to +257F degrees Length: 10Ft / 3MNote: - Professional installation is highly recommendedPackage Included: 1 * AN-6 Nylon Stainless Steel Braided Hose (16Ft / 5M)4 * AN-6 Straight Reusable Swivel Hose End 2 * AN-6 45 Degree Reusable Swivel Hose End 2 * AN-6 90 Degree Reusable Swivel Hose End2 * AN-6 180 Degree Reusable Swivel Hose End

• 16Ft -6AN Nylon Braided Fuel Line / Inner Hose Material: CPE Synthetic Material Tubing
• Covered with High Quality Stainless Steel to Give a Cool Racing Appearance
• Maximized Resistance to Heat, Corrosion and Abrasion,Not for E85
• Working Temperature:-40 F to +257 F .Working Pressure:500 PSI .
• No instruction included,professional installation is highly recommended